Polyanionic cellulose (PAC) is a water-soluble cellulose ether derivative prepared by chemical modification of natural cellulose. It is an important water-soluble cellulose ether. It is usually used as its sodium salt and is widely used in oil drilling, especially salt water wells and offshore oil drilling. PAC-Application In Petroleum 1. The functions of PAC and CMC in oil field are as follows: - The mud containing PAC and CMC can make the well wall form thin and hard filter cake with low permeability and reduce the water loss; - After adding PAC and CMC into the mud, the drilling rig can obtain low initial shear force, make the mud easy to release the gas wrapped in it, and quickly discard the debris in the mud pit; - Like other suspended dispersions, drilling mud has a certain existence period, which can be stabilized and extended by adding PAC and CMC. 2. PAC and CMC have the following excellent performance in oilfield application: - High degree of substitution, good uniformity of substitution, high viscosity and low dosage, effectively improving mud service efficiency; - Good moisture resistance, salt resistance and alkali resistance, suitable for fresh water, seawater and saturated brine water-based mud; - The mud cake formed is of good quality and stable, which can effectively stabilize the soft soil structure and prevent shaft wall collapse; - It is suitable for mud systems with difficult solid content control and wide variation range. 3. Application characteristics of PAC and CMC in oil drilling: - It has high water loss control ability, especially efficient fluid loss reducer. With low dosage, it can control water loss at a high level without affecting other properties of mud; - It has good temperature resistance and excellent salt resistance. It can still have good water loss reduction ability and certain rheology under a certain salt concentration. The viscosity is almost unchanged after dissolving in salt water. It is especially suitable for offshore drilling and deep wells; - It can well control the rheology of mud and has good thixotropy. It is suitable for any water-based mud in fresh water, seawater and saturated brine; - In addition, PAC is used as cementing fluid to prevent fluid from entering pores and fractures; - The filter press fluid prepared with PAC has good resistance to 2% KCl solution (it must be added when preparing filter press fluid), good solubility, convenient use, can be prepared on site, fast gel forming speed and strong sand carrying capacity. When used in low permeability formation, its filter press effect is more excellent. Detail Parameters Addition amount (%) Oil production fracturing agent 0.4-0.6% Drilling treatment agent 0.2-0.8% If you need to customize, you can provide detailed formula and process. Indicators PAC-HV PAC-LV Color White or light yellowpowder White or light yellow powder or particles water content 10.0% 10.0% PH 6.0-8.5 6.0-8.5 Degree of substitution 0.8 0.8 sodium chloride 5% 2% Purity 90% 90% Particle size 90% pass 250 microns(60 mesh) 90% pass 250 microns (60 mesh) Viscosity (b) 1% aqueous solution 3000-6000mPa.s 10-100mPa.s Application performance Model Index AV FL PAC-ULV ≤10 ≤16 PAC－LV1 ≤30 ≤16 PAC－LV2 ≤30 ≤13 PAC－LV3 ≤30 ≤13 PAC－LV4 ≤30 ≤13 PAC－HV1 ≥50 ≤23 PAC－HV2 ≥50 ≤23 PAC－HV3 ≥55 ≤20 PAC－HV4 ≥60 ≤20 PAC－UHV1 ≥65 ≤18 PAC－UHV2 ≥70 ≤16 PAC－UHV3 ≥75 ≤16

VAE emulsion is short of vinyl acetate copolymer emulsion, it is the emulsion product which uses vinyl acetate monomer and ethylene monomer as raw material with the method of press copolymerization. The characteristics of the process is using outer loop to expose the heat of reaction, the polymer is fast, the capacity is large, the process of polymer is controlled by computer, the product quality is stable, low depletion, little pollution. The product is non-toxic, tasteless, it is environmental protection product which is recommended by the government. VAE emulsion is a kind of milky liquid. Because of ethylene copolymerization monomer, VAE emulsion has the characteristic of inner plasticizing, and filming, weather resistance, adhesive, and compatible, weak acid and alkali resistance. Adhesive basic material VAE emulsion can be used as adhesive basic material, such as wood and wooden products, paper and paper products, package composite materials, plastics, structure. Paint basic material VAE emulsion can be used as inner wall paint, elasticity paint, waterproof paint of roof and groundwater, the basic material of fireproof and heat preservation paint, it also can be used as the basic material of the caulking of structure, sealing adhesive. Paper sizing and glazing VAE emulsion can sizing and glazing many kinds of paper, it is excellent material of producing many kinds of advanced paper. VAE emulsion can be used as the basic material of no-woven adhesive. Cement modifier VAE emulsion can be mixed with cement mortal so that improving the property of the cement product. VAE emulsion can be used as the adhesive, such as tufted carpet, needle carpet. weaving carpet, artificial fur, electrostatic flocking, high-level structure assemble carpet. Product advantages and application scope GW-705/GW-706: The common adhesive with high quality, excellent innitial adhesion, mechanical stability Widely used in paper product, wooden package, cement, cigarette. GW-707/GW-707H: The biggest advantages is its good water resistance in the condition of the static load, it has excellent adhesive Widely used in paper product, package, coil adhesive, high-speed adhesive, water resistance coating. GW-102/GW-102H: It has better adhesive. The compatibility of material is good Widely used in Shoes Adhesive, Clothes Adhesive, Wood, Paper Painting, Furnishing Detail parameters Product Name Solid Content %≥ PH Value Viscosity(25℃) Mpa.s Remain Vam %≤ Particle Size um≤ Dilution Stability %≤ Minimum film-forming Ethylene content % temperature ℃ GW-705 54.4 4.0-6.0 1500-2500 0.5 2 3.5 0 16±2 GW-706 54.4 4.0-6.0 2500-3300 0.5 2 3.5 0 16±2 GW-707 54.4 4.0-6.0 500-1000 0.5 2 5 0 16±2 GW-707H 54.4 4.0-6.0 1000-1500 0.5 2 3.5 0 16±2 GW-102 55 4.0-6.5 3500-4000 0.5 0.2-2.0 3.5 16.5 GW-102H 55.5 4.0-6.5 4000-4500 0.5 0.2-2.0 3.5 17

Daily chemical Detergent grade hydroxypropyl methyl cellulose (HPMC) is a synthetic high molecular polymer prepared by chemical modification with natural cellulose as raw material. Daily chemical grade hydroxypropyl methylcellulose is a white or slightly yellow powder, and it is odorless, tasteless and non-toxic. It can dissolve in cold water and organic solvents to form a transparent viscous solution. The water liquid has surface activity, high transparency, and strong stability, and its dissolution in water is not affected by pH. It has thickening and anti-freezing effects in shampoos and shower gels, and has water retention and good film-forming properties for hair and skin. In the application of cosmetics, it is mainly used for thickening, foaming, stable emulsification, dispersion, adhesion, film-forming and improving water retention of cosmetics. High viscosity products are used as thickeners, and low viscosity products are mainly used for suspension dispersion and film-forming. is mainly used in shampoo, shower gel, cleansing cream, lotion, cream, gel, toner, conditioner, styling products, toothpaste, mouthwash, and toy bubble water. Product Description 1. Good dispersion in cool water. Through excellent and uniform surface treatment, it can be quickly dispersed in cool water to avoid agglomeration and uneven dissolution, and obtain a uniform solution finally; 2. Good thickening effect. The required consistency of the solution can be obtained by adding a small amount. It is effective for systems in which other thickeners are difficult to thicken; 3. Safety. Safe and non-toxic, physiologically harmless, It can not be absorbed by the body; 4. Good compatibility and system stability. It is a non-ionic material that works well with other auxiliaries and doesn't react with ionic additives to keep the system stable; 5. Good emulsification and foam stability. It has high surface activity and can provide the solution with good emulsification effect. At the same time, it can keep the bubble stable in the solution and and give the solution a good application property; 6. High light transmittance. The cellulose ether is specially optimized from the raw material to the production process, and has excellent transmittance to obtain a transparent and clear solution.

Polyvinyl chloride resin (PVC): white powder in appearance. It is widely used in industrial products, floor leather, artificial leather, pipes, wires and cables, packaging film, foaming materials, etc. the packaging is 25kg / bag, 600kg / bag and 1200kg / bag. DG-1300: production of cable material, fresh-keeping film, etc. DG-1000k: production of plastic profiles, pipes, etc DG-1000s: production of packaging film, etc DG-800: production of packaging sheet, medical sheet, etc DG-700: production of pipe fittings, foamed plates, etc Main indicators of product standard (Q / 12 hg5220-2019) Project DG-1300 DG-1000K DG-1000S DG-700 DG-800 Average degree of polymerization P 1221-1380 981-1080 981-1080 651-750 751-850 Apparent density, g / ml 0.46-0.54 0.51-0.57 0.51-0.57 0.53-0.61 0.54-0.60 Whiteness (160 ℃, 10min),% ≥ 78 78 78 75 78 Corresponding table of degree of polymerization, viscosity and K value Average degree of polymerization 2351-2650 1221-1380 981-1080 771-870 751-750 651-750 481-600 401-500 Viscosity, ml / g 222-248 125-138 105-138 87-96 86-94 73-86 62-72 57-64 K value 89-93 70-73 65-67 60-62 59-62 55-59 51-55 49-51

Polyvinyl chloride resin (PVC): white powder in appearance. It is widely used in industrial products, floor leather, artificial leather, pipes, wires and cables, packaging film, foaming materials, etc. the packaging is 25kg / bag, 600kg / bag and 1200kg / bag. DG-1300: production of cable material, fresh-keeping film, etc. DG-1000k: production of plastic profiles, pipes, etc DG-1000s: production of packaging film, etc DG-800: production of packaging sheet, medical sheet, etc DG-700: production of pipe fittings, foamed plates, etc Main indicators of product standard (Q / 12 hg5220-2019) Project DG-1300 DG-1000K DG-1000S DG-700 DG-800 Average degree of polymerization P 1221-1380 981-1080 981-1080 651-750 751-850 Apparent density, g / ml 0.46-0.54 0.51-0.57 0.51-0.57 0.53-0.61 0.54-0.60 Whiteness (160 ℃, 10min),% ≥ 78 78 78 75 78 Corresponding table of degree of polymerization, viscosity and K value Average degree of polymerization 2351-2650 1221-1380 981-1080 771-870 751-750 651-750 481-600 401-500 Viscosity, ml / g 222-248 125-138 105-138 87-96 86-94 73-86 62-72 57-64 K value 89-93 70-73 65-67 60-62 59-62 55-59 51-55 49-51

Polyanionic cellulose (PAC) is a water-soluble cellulose ether derivative prepared by chemical modification of natural cellulose. It is an important water-soluble cellulose ether. It is usually used as its sodium salt and is widely used in oil drilling, especially salt water wells and offshore oil drilling. PAC-Application In Petroleum 1. The functions of PAC and CMC in oil field are as follows: - The mud containing PAC and CMC can make the well wall form thin and hard filter cake with low permeability and reduce the water loss; - After adding PAC and CMC into the mud, the drilling rig can obtain low initial shear force, make the mud easy to release the gas wrapped in it, and quickly discard the debris in the mud pit; - Like other suspended dispersions, drilling mud has a certain existence period, which can be stabilized and extended by adding PAC and CMC. 2. PAC and CMC have the following excellent performance in oilfield application: - High degree of substitution, good uniformity of substitution, high viscosity and low dosage, effectively improving mud service efficiency; - Good moisture resistance, salt resistance and alkali resistance, suitable for fresh water, seawater and saturated brine water-based mud; - The mud cake formed is of good quality and stable, which can effectively stabilize the soft soil structure and prevent shaft wall collapse; - It is suitable for mud systems with difficult solid content control and wide variation range. 3. Application characteristics of PAC and CMC in oil drilling: - It has high water loss control ability, especially efficient fluid loss reducer. With low dosage, it can control water loss at a high level without affecting other properties of mud; - It has good temperature resistance and excellent salt resistance. It can still have good water loss reduction ability and certain rheology under a certain salt concentration. The viscosity is almost unchanged after dissolving in salt water. It is especially suitable for offshore drilling and deep wells; - It can well control the rheology of mud and has good thixotropy. It is suitable for any water-based mud in fresh water, seawater and saturated brine; - In addition, PAC is used as cementing fluid to prevent fluid from entering pores and fractures; - The filter press fluid prepared with PAC has good resistance to 2% KCl solution (it must be added when preparing filter press fluid), good solubility, convenient use, can be prepared on site, fast gel forming speed and strong sand carrying capacity. When used in low permeability formation, its filter press effect is more excellent. Detail Parameters Addition amount (%) Oil production fracturing agent 0.4-0.6% Drilling treatment agent 0.2-0.8% If you need to customize, you can provide detailed formula and process. Indicators PAC-HV PAC-LV Color White or light yellowpowder White or light yellow powder or particles water content 10.0% 10.0% PH 6.0-8.5 6.0-8.5 Degree of substitution 0.8 0.8 sodium chloride 5% 2% Purity 90% 90% Particle size 90% pass 250 microns(60 mesh) 90% pass 250 microns (60 mesh) Viscosity (b) 1% aqueous solution 3000-6000mPa.s 10-100mPa.s Application performance Model Index AV FL PAC-ULV ≤10 ≤16 PAC－LV1 ≤30 ≤16 PAC－LV2 ≤30 ≤13 PAC－LV3 ≤30 ≤13 PAC－LV4 ≤30 ≤13 PAC－HV1 ≥50 ≤23 PAC－HV2 ≥50 ≤23 PAC－HV3 ≥55 ≤20 PAC－HV4 ≥60 ≤20 PAC－UHV1 ≥65 ≤18 PAC－UHV2 ≥70 ≤16 PAC－UHV3 ≥75 ≤16

The appearance of PVA is white or yellowish particles or powder. It is a widely used water-soluble environmental friendly polymer. Its performance is between plastic and rubber. It has good water solubility, adhesion, film flexibility, smoothness, oil resistance, solvent resistance, colloidal protection, gas resistance, wear resistance and thermal stability. PVA17-88 Scope of Application 1. Film processing industry 2. Paper processing industry 3. Adhesive industry 4. Additives for building materials 5. Stabilizer industry 6. Plastic molding industry PVA20-88 Scope of Application 1. Fiber processing industry: short fiber yarn, long yarn and post-processing. 2. Film processing industry: using different processes to produce water-soluble films and other fields. 3. Coating mold industry: base cloth shaping and strengthening and other fields. 4. Paper processing industry:Indicates sizing and other fields. 5. Adhesive industry: re wet bonding and other fields. 6. stabilizer industry: vinyl acetate lotion polymerization. 7. Others: cosmetics, pharmaceutical products, additives for building materials, temporary protective films and other fields. PVA24-88 Scope of Application 1.Powder chemical building materials 2.Adhesives 3.Fiber processing industry 4.Polymerization dispersant 5.Cosmetics 6.Medicine PVA17-99 Scope of Application 1.The solution prepared by the product can be used as the thickener and anti-flow agent of the emulsion. 2.For paper surface sizing can improve paper strength and ink absorption. 3.The crosslinking performance of the product can be used to prepare various water-resistant adhesives. 4.For the production of paper and building glue. 5.For the production of polyvinyl alcohol fiber, water-soluble fiber. 6.Fiber paste: the film has good forming performance, soft and strong tensile resistance and elasticity, but also has the characteristics of friction resistance, implication, smoothness and good feather effect. And compared with starch pulp, there is no need to worry about spoilage and mildew. PVA2099-99 Scope of Application 1. Adhesives and adhesives: used for office paste, rewetting paste, paper tube, paper bag, carton, glued paperboard, glued wood board, non-woven fabric, etc. It is used for building materials, iron, acid salt, ceramics, pottery, ink, paint glue, paint glue, cement mixture for concrete strengthening, etc. 2.Fiber size: good film forming performance, soft and strong tension resistance and elasticity. It also has the characteristics of friction resistance, involvement, smoothness and good feather effect. And compared with starch size, there is no need to worry about corruption and deterioration, and mildew rarely occurs. 3.Paper industry: it can be used for surface coating and polishing, which can significantly improve the ester resistance, solvent resistance and water resistance, and produce higher fabric strength. It can also be used as adhesive in coating system and carrier of optical polishing agent. 4. Polymerization agent: used as an effective dispersant or stabilizer. They are mainly used as protective colloids and can enhance emulsification at very low concentrations. 5. Polyvinyl alcohol can play a role in many other industrial applications, such as ceramics, water-soluble films, peelable coatings and temporary adhesives for non-woven products. These products can also be used in various building materials, such as putty and plaster. PVA2499-99 Scope of Application 1. Used in warp sizing, fabric finishing agent and vinylon fiber raw materials in textile industry. 2. Construction and decoration industry: construction glue, interior and exterior wall coating, adhesive. 3. It is used as polymerization emulsifier, dispersant and polyvinyl formal, acetaldehyde and butyraldehyde resin in chemical industry. 4. Paper industry is used as paper adhesive. 5. In agriculture, it is used as soil conditioner, pesticide adhesion synergist and polyvinyl alcohol film. 6. Other aspects can also be used in daily cosmetics and high-frequency quenchants. PVA2699-99 Scope of Application 1.Adhesive industry: paper and paper tube bonding. 2.Construction industry: acetalization products are used for construction glue, interior and exterior wall coatings and adhesives. 3. Ceramic industry: aluminum ball binder, ceramic binder, etc. 4. Stabilizer industry: vinyl acetate emulsion polymerization and urea formaldehyde adhesive lotion stability. Detail Parameters PVA Shuangxin index Name Alcoholysis degree(mol %) Viscosity(mPa.s) Volatile consituent(%) Purity(%) PH Ash (%) 17-88 86.0-90.0 19.5-32.0 5.0 93.5 5-7 0.5 20-88 86.0-90.0 28.0-43.0 5.0 93.5 5-7 0.5 24-88 86.0-90.0 43.0-65.0 5.0 93.5 5-7 0.5 17-99 98.0-100 21.0-33.0 5.0 93.5 5-7 0.7 20-99 98.0-100 45.0-58.0 5.0 93.5 5-7 0.7 24-99 98.0-100 66.0-83.0 5.0 93.5 5-7 0.7 26-99 98.0-100 76.0-85.0 5.0 93.5 5-7 0.7

Polyvinyl chloride resin (PVC): white powder in appearance. It is widely used in industrial products, floor leather, artificial leather, pipes, wires and cables, packaging film, foaming materials, etc. the packaging is 25kg / bag, 600kg / bag and 1200kg / bag. DG-1300: production of cable material, fresh-keeping film, etc. DG-1000k: production of plastic profiles, pipes, etc DG-1000s: production of packaging film, etc DG-800: production of packaging sheet, medical sheet, etc DG-700: production of pipe fittings, foamed plates, etc Main indicators of product standard (Q / 12 hg5220-2019) Project DG-1300 DG-1000K DG-1000S DG-700 DG-800 Average degree of polymerization P 1221-1380 981-1080 981-1080 651-750 751-850 Apparent density, g / ml 0.46-0.54 0.51-0.57 0.51-0.57 0.53-0.61 0.54-0.60 Whiteness (160 ℃, 10min),% ≥ 78 78 78 75 78 Corresponding table of degree of polymerization, viscosity and K value Average degree of polymerization 2351-2650 1221-1380 981-1080 771-870 751-750 651-750 481-600 401-500 Viscosity, ml / g 222-248 125-138 105-138 87-96 86-94 73-86 62-72 57-64 K value 89-93 70-73 65-67 60-62 59-62 55-59 51-55 49-51

Polyvinyl chloride resin (PVC): white powder in appearance. It is widely used in industrial products, floor leather, artificial leather, pipes, wires and cables, packaging film, foaming materials, etc. the packaging is 25kg / bag, 600kg / bag and 1200kg / bag. DG-1300: production of cable material, fresh-keeping film, etc. DG-1000k: production of plastic profiles, pipes, etc DG-1000s: production of packaging film, etc DG-800: production of packaging sheet, medical sheet, etc DG-700: production of pipe fittings, foamed plates, etc Main indicators of product standard (Q / 12 hg5220-2019) Project DG-1300 DG-1000K DG-1000S DG-700 DG-800 Average degree of polymerization P 1221-1380 981-1080 981-1080 651-750 751-850 Apparent density, g / ml 0.46-0.54 0.51-0.57 0.51-0.57 0.53-0.61 0.54-0.60 Whiteness (160 ℃, 10min),% ≥ 78 78 78 75 78 Corresponding table of degree of polymerization, viscosity and K value Average degree of polymerization 2351-2650 1221-1380 981-1080 771-870 751-750 651-750 481-600 401-500 Viscosity, ml / g 222-248 125-138 105-138 87-96 86-94 73-86 62-72 57-64 K value 89-93 70-73 65-67 60-62 59-62 55-59 51-55 49-51

Polyanionic cellulose (PAC) is a water-soluble cellulose ether derivative prepared by chemical modification of natural cellulose. It is an important water-soluble cellulose ether. It is usually used as its sodium salt and is widely used in oil drilling, especially salt water wells and offshore oil drilling. PAC-Application In Petroleum 1. The functions of PAC and CMC in oil field are as follows: - The mud containing PAC and CMC can make the well wall form thin and hard filter cake with low permeability and reduce the water loss; - After adding PAC and CMC into the mud, the drilling rig can obtain low initial shear force, make the mud easy to release the gas wrapped in it, and quickly discard the debris in the mud pit; - Like other suspended dispersions, drilling mud has a certain existence period, which can be stabilized and extended by adding PAC and CMC. 2. PAC and CMC have the following excellent performance in oilfield application: - High degree of substitution, good uniformity of substitution, high viscosity and low dosage, effectively improving mud service efficiency; - Good moisture resistance, salt resistance and alkali resistance, suitable for fresh water, seawater and saturated brine water-based mud; - The mud cake formed is of good quality and stable, which can effectively stabilize the soft soil structure and prevent shaft wall collapse; - It is suitable for mud systems with difficult solid content control and wide variation range. 3. Application characteristics of PAC and CMC in oil drilling: - It has high water loss control ability, especially efficient fluid loss reducer. With low dosage, it can control water loss at a high level without affecting other properties of mud; - It has good temperature resistance and excellent salt resistance. It can still have good water loss reduction ability and certain rheology under a certain salt concentration. The viscosity is almost unchanged after dissolving in salt water. It is especially suitable for offshore drilling and deep wells; - It can well control the rheology of mud and has good thixotropy. It is suitable for any water-based mud in fresh water, seawater and saturated brine; - In addition, PAC is used as cementing fluid to prevent fluid from entering pores and fractures; - The filter press fluid prepared with PAC has good resistance to 2% KCl solution (it must be added when preparing filter press fluid), good solubility, convenient use, can be prepared on site, fast gel forming speed and strong sand carrying capacity. When used in low permeability formation, its filter press effect is more excellent. Detail Parameters Addition amount (%) Oil production fracturing agent 0.4-0.6% Drilling treatment agent 0.2-0.8% If you need to customize, you can provide detailed formula and process. Indicators PAC-HV PAC-LV Color White or light yellowpowder White or light yellow powder or particles water content 10.0% 10.0% PH 6.0-8.5 6.0-8.5 Degree of substitution 0.8 0.8 sodium chloride 5% 2% Purity 90% 90% Particle size 90% pass 250 microns(60 mesh) 90% pass 250 microns (60 mesh) Viscosity (b) 1% aqueous solution 3000-6000mPa.s 10-100mPa.s Application performance Model Index AV FL PAC-ULV ≤10 ≤16 PAC－LV1 ≤30 ≤16 PAC－LV2 ≤30 ≤13 PAC－LV3 ≤30 ≤13 PAC－LV4 ≤30 ≤13 PAC－HV1 ≥50 ≤23 PAC－HV2 ≥50 ≤23 PAC－HV3 ≥55 ≤20 PAC－HV4 ≥60 ≤20 PAC－UHV1 ≥65 ≤18 PAC－UHV2 ≥70 ≤16 PAC－UHV3 ≥75 ≤16

Mixed cementitious mortars have become a very important part of the mortar industry in Global and play anindispensable role due to the market promotion and national support of policy. In development of mortars, cellulose ether is animportant activist. Ordinary mortar is economically demanding in which cement level is small, but the requirements for its operating and machine spraying properties are still high, so sand grading and additives are important. In addition, mechanical application will become a definite tendency of development of ready-mixed mortar, cellulose ether will make mechanical application possible. Product Features Increase water demand. High water retention, prolong the operating time of the material, improve the working performance, avoid the phenomenon of crusting, and help to improve the mechanical strength of the material. Improved operating performance, provide lubrication and uniform texture, so that the surface of the material is easier to wipe, thus improving the construction efficiency, and improve the resistance to cracking of putty. Improve homogeneity, and improve vertical flow resistance. HPMC for tile adhesive Ceramic tiles have high performance and excellent work efficiency when pasted on various substrates. Skid resistance and better opening time are the key to better adhesive requirements. HPMC for wall putty HPMC is non-ionic cellulose ether made from natural cotton fiber under series of chemical processing. It’s odorless, tasteless and non-toxic white powder, can be dissolved in normal water to form a transparent viscous solution with the properties of thickening,binding, dispersing, emulsifying, film coating, suspending, absorbing, gelling, water retention and colloid protection. cellulose ethers impart the following excellent properties to mortar: 一Optimized wetting ability to the substrate 一 Advanced water retention ability 一 good spraying and pumping performance 一 Improve cement hydration by bonding strength Product Description 1) Appearance: HPMC is a nonionic cellulose ether, white grayish-white powder or granule,odorless and flavorless, soluble in cold water, glacial acetic acid, ethanol, methanol and propylene glycol, slightly soluble in acetone depending on the degree of substitutions, practically insoluble in hot water, ethylene glycol and toluene. HPMC is dissolved in a mixture of 10% methanol and 90% methylene chloride to form colloidal solutions. 2) The solution of HPMC has surface activity, high transparency, and stable performance. When heated at certain temperature, the solution becomes cloudy or forms flocculent gel. However, the solution becomes clear again after cooling. Different types of HPMC have different gelation temperatures. The solubility varies with the viscosity. The lower the viscosity, the higher solubility it has. The different types of HPMC are different in some properties and their solubility in water is not affected by pH. 3) Particle sizes: 100% pass rate in 80 mesh. 4) Apparent density: 0.25-0.70 g/mL (usually about 0.5 g/mL),specific density 1.26-1.31mL. 5) Color change temperature:190-200°C; Carbonization temperature:280-300°C. 6) Surface tension:42-56 dyn/cm (2% aqueous solution). 7) The higher methoxy content in HPMC, the lower gelation temperature, and the higher solubility in water and surface activity. 8) HPMC has some other characteristics, for example, thickening property, pH stability, retention of water, excellent film-forming property, good disperse and adhesion ability. Detail parameters Item Index Content of Methoxyl (%) 24.0-30.0 Content of Hydroxy propyl (%) 7.0-12.0 Temperature of gelation 54℃—90℃ Moisture 5% max Ash 5% max PH value 6—8 Appearance White powder Fitness 80—100mesh Viscosity 100 to 200000 it can be customized

Polyanionic cellulose (PAC) is a water-soluble cellulose ether derivative prepared by chemical modification of natural cellulose. It is an important water-soluble cellulose ether. It is usually used as its sodium salt and is widely used in oil drilling, especially salt water wells and offshore oil drilling. PAC-Application In Petroleum 1. The functions of PAC and CMC in oil field are as follows: - The mud containing PAC and CMC can make the well wall form thin and hard filter cake with low permeability and reduce the water loss; - After adding PAC and CMC into the mud, the drilling rig can obtain low initial shear force, make the mud easy to release the gas wrapped in it, and quickly discard the debris in the mud pit; - Like other suspended dispersions, drilling mud has a certain existence period, which can be stabilized and extended by adding PAC and CMC. 2. PAC and CMC have the following excellent performance in oilfield application: - High degree of substitution, good uniformity of substitution, high viscosity and low dosage, effectively improving mud service efficiency; - Good moisture resistance, salt resistance and alkali resistance, suitable for fresh water, seawater and saturated brine water-based mud; - The mud cake formed is of good quality and stable, which can effectively stabilize the soft soil structure and prevent shaft wall collapse; - It is suitable for mud systems with difficult solid content control and wide variation range. 3. Application characteristics of PAC and CMC in oil drilling: - It has high water loss control ability, especially efficient fluid loss reducer. With low dosage, it can control water loss at a high level without affecting other properties of mud; - It has good temperature resistance and excellent salt resistance. It can still have good water loss reduction ability and certain rheology under a certain salt concentration. The viscosity is almost unchanged after dissolving in salt water. It is especially suitable for offshore drilling and deep wells; - It can well control the rheology of mud and has good thixotropy. It is suitable for any water-based mud in fresh water, seawater and saturated brine; - In addition, PAC is used as cementing fluid to prevent fluid from entering pores and fractures; - The filter press fluid prepared with PAC has good resistance to 2% KCl solution (it must be added when preparing filter press fluid), good solubility, convenient use, can be prepared on site, fast gel forming speed and strong sand carrying capacity. When used in low permeability formation, its filter press effect is more excellent. Detail Parameters Addition amount (%) Oil production fracturing agent 0.4-0.6% Drilling treatment agent 0.2-0.8% If you need to customize, you can provide detailed formula and process. Indicators PAC-HV PAC-LV Color White or light yellowpowder White or light yellow powder or particles water content 10.0% 10.0% PH 6.0-8.5 6.0-8.5 Degree of substitution 0.8 0.8 sodium chloride 5% 2% Purity 90% 90% Particle size 90% pass 250 microns(60 mesh) 90% pass 250 microns (60 mesh) Viscosity (b) 1% aqueous solution 3000-6000mPa.s 10-100mPa.s Application performance Model Index AV FL PAC-ULV ≤10 ≤16 PAC－LV1 ≤30 ≤16 PAC－LV2 ≤30 ≤13 PAC－LV3 ≤30 ≤13 PAC－LV4 ≤30 ≤13 PAC－HV1 ≥50 ≤23 PAC－HV2 ≥50 ≤23 PAC－HV3 ≥55 ≤20 PAC－HV4 ≥60 ≤20 PAC－UHV1 ≥65 ≤18 PAC－UHV2 ≥70 ≤16 PAC－UHV3 ≥75 ≤16

Polyvinyl chloride resin (PVC): white powder in appearance. It is widely used in industrial products, floor leather, artificial leather, pipes, wires and cables, packaging film, foaming materials, etc. the packaging is 25kg / bag, 600kg / bag and 1200kg / bag. DG-1300: production of cable material, fresh-keeping film, etc. DG-1000k: production of plastic profiles, pipes, etc DG-1000s: production of packaging film, etc DG-800: production of packaging sheet, medical sheet, etc DG-700: production of pipe fittings, foamed plates, etc Main indicators of product standard (Q / 12 hg5220-2019) Project DG-1300 DG-1000K DG-1000S DG-700 DG-800 Average degree of polymerization P 1221-1380 981-1080 981-1080 651-750 751-850 Apparent density, g / ml 0.46-0.54 0.51-0.57 0.51-0.57 0.53-0.61 0.54-0.60 Whiteness (160 ℃, 10min),% ≥ 78 78 78 75 78 Corresponding table of degree of polymerization, viscosity and K value Average degree of polymerization 2351-2650 1221-1380 981-1080 771-870 751-750 651-750 481-600 401-500 Viscosity, ml / g 222-248 125-138 105-138 87-96 86-94 73-86 62-72 57-64 K value 89-93 70-73 65-67 60-62 59-62 55-59 51-55 49-51

Polyvinyl chloride resin (PVC): white powder in appearance. It is widely used in industrial products, floor leather, artificial leather, pipes, wires and cables, packaging film, foaming materials, etc. the packaging is 25kg / bag, 600kg / bag and 1200kg / bag. DG-1300: production of cable material, fresh-keeping film, etc. DG-1000k: production of plastic profiles, pipes, etc DG-1000s: production of packaging film, etc DG-800: production of packaging sheet, medical sheet, etc DG-700: production of pipe fittings, foamed plates, etc Main indicators of product standard (Q / 12 hg5220-2019) Project DG-1300 DG-1000K DG-1000S DG-700 DG-800 Average degree of polymerization P 1221-1380 981-1080 981-1080 651-750 751-850 Apparent density, g / ml 0.46-0.54 0.51-0.57 0.51-0.57 0.53-0.61 0.54-0.60 Whiteness (160 ℃, 10min),% ≥ 78 78 78 75 78 Corresponding table of degree of polymerization, viscosity and K value Average degree of polymerization 2351-2650 1221-1380 981-1080 771-870 751-750 651-750 481-600 401-500 Viscosity, ml / g 222-248 125-138 105-138 87-96 86-94 73-86 62-72 57-64 K value 89-93 70-73 65-67 60-62 59-62 55-59 51-55 49-51

Mixed cementitious mortars have become a very important part of the mortar industry in Global and play anindispensable role due to the market promotion and national support of policy. In development of mortars, cellulose ether is animportant activist. Ordinary mortar is economically demanding in which cement level is small, but the requirements for its operating and machine spraying properties are still high, so sand grading and additives are important. In addition, mechanical application will become a definite tendency of development of ready-mixed mortar, cellulose ether will make mechanical application possible. Product Features Increase water demand. High water retention, prolong the operating time of the material, improve the working performance, avoid the phenomenon of crusting, and help to improve the mechanical strength of the material. Improved operating performance, provide lubrication and uniform texture, so that the surface of the material is easier to wipe, thus improving the construction efficiency, and improve the resistance to cracking of putty. Improve homogeneity, and improve vertical flow resistance. HPMC for tile adhesive Ceramic tiles have high performance and excellent work efficiency when pasted on various substrates. Skid resistance and better opening time are the key to better adhesive requirements. HPMC for wall putty HPMC is non-ionic cellulose ether made from natural cotton fiber under series of chemical processing. It’s odorless, tasteless and non-toxic white powder, can be dissolved in normal water to form a transparent viscous solution with the properties of thickening,binding, dispersing, emulsifying, film coating, suspending, absorbing, gelling, water retention and colloid protection. cellulose ethers impart the following excellent properties to mortar: 一Optimized wetting ability to the substrate 一 Advanced water retention ability 一 good spraying and pumping performance 一 Improve cement hydration by bonding strength Product Description 1) Appearance: HPMC is a nonionic cellulose ether, white grayish-white powder or granule,odorless and flavorless, soluble in cold water, glacial acetic acid, ethanol, methanol and propylene glycol, slightly soluble in acetone depending on the degree of substitutions, practically insoluble in hot water, ethylene glycol and toluene. HPMC is dissolved in a mixture of 10% methanol and 90% methylene chloride to form colloidal solutions. 2) The solution of HPMC has surface activity, high transparency, and stable performance. When heated at certain temperature, the solution becomes cloudy or forms flocculent gel. However, the solution becomes clear again after cooling. Different types of HPMC have different gelation temperatures. The solubility varies with the viscosity. The lower the viscosity, the higher solubility it has. The different types of HPMC are different in some properties and their solubility in water is not affected by pH. 3) Particle sizes: 100% pass rate in 80 mesh. 4) Apparent density: 0.25-0.70 g/mL (usually about 0.5 g/mL),specific density 1.26-1.31mL. 5) Color change temperature:190-200°C; Carbonization temperature:280-300°C. 6) Surface tension:42-56 dyn/cm (2% aqueous solution). 7) The higher methoxy content in HPMC, the lower gelation temperature, and the higher solubility in water and surface activity. 8) HPMC has some other characteristics, for example, thickening property, pH stability, retention of water, excellent film-forming property, good disperse and adhesion ability. Detail parameters Item Index Content of Methoxyl (%) 24.0-30.0 Content of Hydroxy propyl (%) 7.0-12.0 Temperature of gelation 54℃—90℃ Moisture 5% max Ash 5% max PH value 6—8 Appearance White powder Fitness 80—100mesh Viscosity 100 to 200000 it can be customized