F/HJ type (high-performance type) printing coating color paste
Product Information
In order to adapt to and meet the needs of high-end products and consumer quality improvement in the textile printing and dyeing industry, our company has independently developed a series of high-performance, high-density HJ type printing coating pigments, which have been welcomed and selected by customers at home and abroad.
Widely applicable, it can be printed on blended fabrics of cotton, linen, viscose, polyester, nylon, polypropylene, chlorinated polyester, and various fibers, suitable for pigment dyeing and garment dyeing; Can be printed on materials such as leather, wood, paper, synthetic leather, etc; Can be used for coloring water-based materials such as interior wall coatings and cement.
Model and Product Name
Packaging specifications
30kg flange drum
Shelf life: (from the date of production)
Store at room temperature (0-40 ° C) in a ventilated, cool, dry, and dark place. Seal immediately after use to avoid long-term contact with air. It is recommended to filter before use; If some products experience sedimentation and layering during long-term storage, they must be thoroughly stirred. If the quality meets the requirements, they can still be used.
Shelf life: 2 years
Special note
1. Dilute the coating with a small amount of water and add it to the slurry, stir thoroughly, and obtain a satisfactory color concentration. Filter and let it stand for a while until the air bubbles disappear before use.
2. Reference prescription (mainly applicable to cotton and polyester cotton fabric printing. The specific prescription should be determined by the customer according to their own requirements) Coating color paste: 1-8%, adhesive 15-25%, printing paste: 80-70%.
3. Process conditions: Printing drying (100 ° C x 2-3 minutes) - baking (130-150 ° C x 1-2 minutes)
matters needing attention
1.The color fastness of pigment paste printing and coloring mainly depends on the good or poor compatibility of the quality of the selected solid paste, adhesive paste, and fixing agent. Remember: Mix thoroughly before use and seal promptly after use.
2. Before use, please confirm that production tools, equipment, additives, and raw materials do not contain or come into contact with non environmentally friendly substances to prevent cross contamination.
3. As we cannot foresee or control the conditions and environmental factors under which our products will be used by customers, we suggest that sufficient samples and necessary testing be conducted before use. If the user opens the seal for use, we will consider it as their recognition of the quality of our products.
